Azden 31HT Specifications download pdf (Page 2)

(5) 3-Position Switch

left position:OFF - Middle position:STANDBY - Right position:ON

In the “STANDBY” position, the audio is muted.

(6) LED Indicator

Red when the switch is in “STANDBY” position - Green in “ON” position.

(7) Audio Output Connector

This 3.5mm mono connector is where the mic is plugged in. This connec-

tor was designed to be used with a special “screw-down” connecting jack

that eliminates the possibility of the jack being accidentally pulled out. A

standard 3.5mm mono jack can also be used but will not afford the extra

protection.

(8) Metal Belt Clip

Used to attach the 32BT securely to a belt.

NOTE: Remove the battery if the transmitter is not used for a long period of time.

(the lighting flash with arrowhead symbol within an

equilateral triangle) is intended to alert the user to the

presence of uninsulated "dangerous voltage" within

the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons: and (the explanation point within an

equilateral triangle) is intended to alert the user to the

presence of important operating and maintenance

(servicing) instructions in the literature accompanying

the product.

page 13

AAPS 25b using wall-mount bracket

Installing an APS-H Carry Handle:

There is an optional handle for the APS 25b that is easy to attach to the top

of the speaker. The handle screws into the threaded hole on the top of the speaker

by turning it clockwise. Tighten the handle until it is "square" with the speaker but

do not overtighten. Instead, once the desired position is achieved, stop turning

the handle and tighten the nut clockwise at the bottom of the handle using a

wrench or pliers.

1 2 3 4 5 6 7 8

No comments

Azden 31HT Specifications Page 2